TF871 Terrafirma Bulkhead Removal Kit Defender 90/110
If you have ever done a long drive in a Defender with the seat pushed hard against the rear bulkhead, the Terrafirma TF871 Bulkhead Removal Kit fixes that. The factory bulkhead behind the front seats limits how far the seats slide back and how far the backrests recline. Taller drivers and passengers in both the 90 and 110 know this complaint well.
With this kit, you cut the bulkhead down to a lower structural point and cap the cut edge with Terrafirma’s black powder coated steel sections. The sections hide the cut, are designed to restore the body strength the full bulkhead provided, and leave a clean finish that looks like it came from the factory. Once it is fitted, your seats get more travel and recline, and it is much easier to reach from the cab into the rear load area, whether you want recovery gear or are loading the back of a Station Wagon.
Terrafirma is a UK brand known across the Land Rover community for practical, well engineered Defender upgrades, and the TF871 is one of its most popular interior modifications. Fitting it means cutting the existing bulkhead panel, so it suits a confident home mechanic or any experienced Land Rover shop.
The TF871 is designed for Defender 90 and 110 Hard Top and Station Wagon models built up to 2006, covering the 200Tdi, 300Tdi, and TD5 eras. Station Wagons built from 2007 onward use a different rear seating layout and do not benefit from this kit.
Part Number: TF871
Free shipping to the lower 48!
No supersessions found.
FAQ
Will the TF871 fit my Defender?
It is designed for Defender 90 and 110 Hard Top and Station Wagon models built up to 2006, including 200Tdi, 300Tdi, and TD5 Rovers. Station Wagons built from 2007 onward have a different rear seating arrangement and do not benefit from this kit.
Does removing the bulkhead weaken the body?
The bulkhead is cut at a structural point, and the Terrafirma steel sections cap the cut edge. They are designed to restore the strength the full bulkhead originally provided while giving the seats more room to move.
What is involved in installation?
You cut the factory bulkhead panel down to the lower structural point, then fit the steel sections over the cut edge. Measure carefully before cutting. If you are not comfortable cutting body panels, any experienced Land Rover shop can do the job.